BLLBR - P 7002 PLASTISOL VARIOUS COLORS

  • MSDS: BLLBR
  • Manufacturer: QCM COMPANY
  • Product Name: P 7002 PLASTISOL VARIOUS COLORS
  • National Stock Number: 8030-01-041-1609
Product Identification

Product ID:P 7002 PLASTISOL VARIOUS COLORS
MSDS Date:11/22/1989
FSC:8030
NIIN:01-041-1609
Kit Part:Y
MSDS Number: BLLBR

Responsible Party
QCM COMPANY
930 SO. CENTRAL AVE.
KENT, WA 98032
US

Emergency Phone: 206-859-0933

Info Phone: 206-859-0933

Preparer: ROY WHEELDON

Cage: 8L872

Contractor
Q C M CO
KENT, WA 98032-6105 US

Telephone: 253-859-0933, FAX 253-859-0935

Cage: 8L872

Ingredients

PHTHALATE PLASTICIZER (NOT HAZARDOUS)


EPOXIDIZED SOYBEAN OIL (NOT HAZARDOUS)


PVC RESIN (NOT HAZARDOUS)


STABILIZER (NOT HAZARDOUS)


ORGANIC PIGMENT (NOT HAZARDOUS)


CADMIUM CARBOXYLATE STABILIZER

Fraction By Weight: 0.1%

OSHA PEL 0.2 MG/M3 (CADMIUM)


ORGANIC PIGMENT (NOT HAZARDOUS)

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE: MAY CAUSE IRRITATION. SKIN: CAN
CAUSE SLIGHT IRRITATION. INHALATION: SMOKE SHOULD BE VENTILATED IF
HEAT PROCESSED. INGESTION: CAN CAUSE GASTROINTESTINAL IRRITATION,
NAUSEA, VOMITING AND DIARRHEA.

First Aid

First Aid:EYE: FLUSH WITH WATER FOR 15 MINUTES. SKIN: WASH WITH SOAP
AND WATER. EXCESSIVE INHALATION, REMOVE TO FRESH AIR. INGESTION:
CONSULT PHYSICIAN.

Fire Fighting

Flash Point:>350F,>177C
Extinguishing Media:DRY CHEMICAL, REGULAR FOAM OR WATER FOG.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS IF
IGNITED.
Unusual Fire/Explosion Hazard:TOXIC GASES CAN FORM-CARBON DIOXIDE,
CARBON MONOXIDE, VARIOUS HYDROCARBONS.

Accidental Release

Spill Release Procedures:SMALL SPILLS: ABSORB ON VERMICULITE OR FLOOR
DRY. LARGE SPILLS: PUMP TO SALVAGE TANK.

Handling

Handling and Storage Precautions:CONTAINERS MAY BE HAZARDOUS WHEN
EMPTIED DUE TO VAPOR BUILD-UP. STORE BETWEEN 50 F AND 90 F, AWAY
FROM HEAT OR FLAME.
Other Precautions:ALL HAZARD PRECAUTIONS IN THE DATA SHEET MUST BE
OBSERVED.

Exposure Controls

Respiratory Protection:RECOMMENDED IF LOCAL EXHAUST. NIOSH APPROVED.
Ventilation:LOCAL EXHAUST: RECOMMENDED FOR HEAT PROCESSING. MECHANICAL
(GENERAL): RECOMMENDED.
Protective Gloves:POLYETHYLENE TYPE
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:GOOD INDUSTRIAL HYGIENE. WASH WITH SOAP AND
WATER IF CONTACT W/SKIN. WASH CONTAMINATED CLOTHING BEFORE RE-USE.
Supplemental Safety and Health

Chemical Properties

Spec Gravity:1.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VARIOUS COLORED LIQUID-VISCOUS

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBONS, HYDROGEN CHLORIDE.

Disposal

Waste Disposal Methods:INCINERATE ACCORDING TO LOCAL AND FEDERAL
STANDARDS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.